Informing or Empowering? Disclosure in the United States and the Netherlands

This paper studies the emergence of one particular 'new' environmental policy instrument: disclosure of emission and pollution data. Disclosure is part of a relatively new sub-set of regulatory measures, based on monitoring, transparency, citizen-empowerment and accountability. It originated in the United States but has recently attracted international attention. The attractiveness of disclosure is obvious; it promises environmental improvement combined with strengthened environmental democracy and community empowerment. By analysing the experiences in the US, and the developments in the Netherlands, this paper seeks to assess the functioning and effectiveness of disclosure. The available empirical evidence suggests that disclosure has a positive impact on the environmental performance of industrial facilities as well as a democratising effect. It is argued that Dutch policy makers wrongfully assume that disclosure cannot work in the Netherlands. The consequence is that citizens are provided with little specific information that cannot be used to put pressure on polluters.     

Estrogenic and esterase-inhibiting potency in rainwater in relation to pesticide concentrations,sampling season and location

In a year-round monitoring program (1998), pesticide composition and toxic potency of the mix of pollutants present in rainwater were measured. The goal of the study was to relate atmospheric deposition of toxic potency and pesticide composition to each other and to sampling period and local agricultural activity. Rainwater was collected in 26 consecutive periods of 14 days in a background location (BACK) and in two locations representative for different agricultural practices, i.e. intensive greenhouse horticulture (HORT) and flower bulb culture (BULB). Samples were chemically analyzed for carbamate (CARB), organophosphate (OP) and organochlorine (OC) pesticides and metabolites. Esterase inhibiting potency of rainwater extracts was measured in a specially developed bio-assay with honeybee esterases and was expressed as an equivalent concentration of the model inhibitor dichlorvos. Estrogenic potency of the extracts was measured in the ER-CALUX reporter gene assay and was expressed as an equivalent concentration of estradiol. Multivariate principal component analysis (PCA) techniques proved to be valuable tools to analyze the numerous pesticide concentrations in relation to toxic potency, sampling location, and sampling season. Pesticide composition in rainwater depended much more on sampling season than on sampling location, but differences between and were mainly attributed to local differences in agricultural practice. On average, the esterase inhibiting potency exceeded the maximum permissible concentration set for dichlorvos in The Netherlands, and was significantly higher in than in and . Esterase inhibition correlated significantly with OP and CARB concentrations, as expected given the working mechanism of these insecticides. The estrogenic potency incidentally exceeded NOEC levels reported for aquatic organisms and was highest in . Although estrogenic potency of rainwater correlated with OC concentrations, the ER-CALUX responses could not be attributed to any particular pesticides. Besides, the contribution of non-analyzed xeno-estrogens as alkylphenol(-ethoxylates) and bisphenol-A to the estrogenic potency of rainwater could not be excluded. Further research should focus on the chemical identification of estrogenic compounds in rainwater. In addition, more attention should be given to the ecological consequences of atmospheric deposition of individual pesticides and of total toxic potencies that regularly exceed environmental criteria for Dutch surface waters and/or toxic threshold values for aquatic organisms.     

Tipping Toward Sustainability: Emerging Pathways of Transformation

This article explores the links between agency, institutions, and innovation in navigating shifts and large-scale transformations toward global sustainability. Our central question is whether social and technical innovations can reverse the trends that are challenging critical thresholds and creating tipping points in the earth system, and if not, what conditions are necessary to escape the current lock-in. Large-scale transformations in information technology, nano- and biotechnology, and new energy systems have the potential to significantly improve our lives; but if, in framing them, our globalized society fails to consider the capacity of the biosphere, there is a risk that unsustainable development pathways may be reinforced. Current institutional arrangements, including the lack of incentives for the private sector to innovate for sustainability, and the lags inherent in the path dependent nature of innovation, contribute to lock-in, as does our incapacity to easily grasp the interactions implicit in complex problems, referred to here as the ingenuity gap. Nonetheless, promising social and technical innovations with potential to change unsustainable trajectories need to be nurtured and connected to broad institutional resources and responses. In parallel, institutional entrepreneurs can work to reduce the resilience of dominant institutional systems and position viable shadow alternatives and niche regimes.     

A rapid lateral flow immunoassay for the detection of fungal alpha-amylase at the workplace

Fungal alpha-amylase is a flour supplement which is added to improve the quality of bakery products. Various studies have shown that exposure to this enzyme is an important risk factor for the development of bakers' allergy and this allergy is reported to be one of the most frequent causes of occupational asthma. A rapid assay was developed to monitor exposure to occupational allergens directly at the workplace. The sensitivity of the developed assay is 0.32 ng amylase mL(-1) in a buffer system with the commercially available alpha-amylase preparation Fungamyl 1600S as the standard. Initial validation tests (n = 33) were performed with airborne and settled dust from an industrial bakery. The new lateral flow immunoassay detected amylase in 22 of the 26 samples regarded as positive in an enzyme immunoassay, and was negative for all seven enzyme immunoassay-negative samples, while the four lateral flow immunoassay-negative/enzyme immunoassay-positive samples all had levels below 2 ng mL(-1). The sensitivity of 2 ng mL(-1) of the amylase lateral flow immunoassay is sufficient for first screening purposes and, therefore, this simple and rapid assay may allow direct on-site demonstration of work-related hazards of bio-allergen exposure. This would be particularly useful in occupational hygiene practice, especially in traditional or small-scale bakeries which lack the technological skills for testing the exposure to respiratory allergens.     

pH-dependent release of cadmium,copper, and lead from natural and sludge-amended soils

The pH-dependent release of cadmium, copper, and lead from soil materials was studied by use of a stirred flow cell to quantify their release and release rates, and to evaluate the method as a test for the bonding strength and potential mobility of heavy metals in soils. Soil materials from sludge-amended and nonamended A horizons from a Thai coarse-textured Kandiustult and a Danish loamy Hapludalf were characterized and tested. For each soil sample, release experiments with steady state pH values in the range 2.9 to 7.1 and duration of 7 d were performed. The effluent was continuously collected and analyzed. Release rates and total releases were higher for the Hapludalf than the Kandiustult and higher for the sludge-amended soils than the nonamended soils. With two exceptions the relative release rates (release rate/total content of metal in soil) plotted vs. steady state pH followed the same curves for each metal, indicating similar bonding strengths. These curves could be described by a rate expression of the form: relative release rate = k[H+]a, with specific a (empirical constant) and k (rate constant) parameters for each metal demonstrating that metal release in these systems can be explained by proton-induced desorption and dissolution reactions. With decreasing pH, pronounced increases in release rates were observed in the sequence cadmium > lead > copper, which express the order of metal lability in the soils. The flow cell system is useful for comparison of metal releases as a function of soil properties, and can be used as a test to rank soils with respect to heavy metal leaching.     

A review of studies applying environmental impact assessment methods on fruit production systems

Although many aspects of environmental accounting methodologies in food production have already been investigated, the application of environmental indicators in the fruit sector is still rare and no consensus can be found on the preferred method. On the contrary, widely diverging approaches have been taken to several aspects of the analyses, such as data collection, handling of scaling issues, and goal and scope definition. This paper reviews studies assessing the sustainability or environmental impacts of fruit production under different conditions and identifies aspects of fruit production that are of environmental importance. Four environmental assessment methods which may be applied to assess fruit production systems are evaluated, namely Life Cycle Assessment, Ecological Footprint Analysis, Emergy Analysis and Energy Balance. In the 22 peer-reviewed journal articles and two conference articles applying one of these methods in the fruit sector that were included in this review, a total of 26 applications of environmental impact assessment methods are described. These applications differ concerning e.g. overall objective, set of environmental issues considered, definition of system boundaries and calculation algorithms. Due to the relatively high variability in study cases and approaches, it was not possible to identify any one method as being better than the others. However, remarks on methodologies and suggestions for standardisation are given and the environmental burdens of fruit systems are highlighted.     

Policy expectations and the use of market mechanisms for regulatory OSH certification and testing regimes

Governments strive increasingly to reduce the ‘burden of legislation’ by shifting responsibilities to private institutions, thereby making use of ‘the market’ as regulating mechanism, and striving to base the relationship with industries on trust, rather then stringent enforcement. This makes mandatory certification and testing arrangements in occupational safety and health (OSH) an attractive alternative for traditional legislation and enforcement. The functioning of such OSH market arrangements has, however, hardly been investigated so far.The research described in this paper elaborated on the same cases that were used in the twin article (Zwetsloot et al., this issue) on risk control in mandatory occupational safety and health certification and testing regimes. In this research we carried out additional analyses on the functioning of market mechanisms in (mandatory) OSH regimes.Other market interests may prevail over the OSH aspect, and the conditions for good market functioning (a well-functioning supply and demand side, independency of the agents, informedness and transparency of the agents, and the added-value of the certificate expressed in the price), are not always met. The results show that policy makers are often too optimistic in their assumptions about the functioning of the market mechanisms in mandatory certification and testing.This does not imply that mandatory certification cannot be an interesting policy option. However, there seems to be a need for a second generation of mandatory certification arrangements, whereby the limitations of the market regulation are recognised, and the consequences are digested.